Skip to content
USA - English
Search

Model 4265HT Ultrasonic Cement Analyzer

Model 4265HT Ultrasonic Cement Analyzer
A Critical Tool for Oil Well Cement Testing
Testing the strength of standard cement cubes only provides information about cured strength. To accurately and effectively schedule a cementing job with a minimum WOC time, you need to determine how a slurry develops strength over time during curing. The Model 4265HT Ultrasonic Cement Analyzer (UCA) provides a determination of the strength development of a cement sample while it is being cured under very high downhole temperature and pressure conditions.

A Proven, Reliable Technique
Cement strength is determined by measuring the change in velocity of an ultrasonic signal transmitted through the cement specimen as it hardens. As the strength of the cement specimen increases, the ultrasonic signal’s transit time through the sample decreases. Using proprietary empirical algorithms that have been proven throughout the Oil and Gas Industry, the relative strength is calculated.

Operational Simplicity
The cement slurry to be tested is prepared in accordance with API recommendations, then placed in the unit’s temperature and pressure-controlled cell which simulates the curing conditions that are expected downhole. During testing, temperature is automatically controlled while pressure is manually set. For dynamic, precise pressure control, an automatic pressure system is available.

All test data including the compressive strength results are then transferred to a computer, running Chandler Engineering Model 5270 Data Acquisition Software.

  • Specifications +


    Features
    • Real-Time Observation of Strength Development
    • Used to predict WOC time
    • Non-Destructive Method
    • Uses Proven Industry-Standard Algorithms
    • Chiller option for simulating low temperature cementing
    • Chandler Model 5270 Data Acquisition Software
    • Optional Automatic Pressure Controller
    • Optional Model 4268ES Cement Expansion / Shrinkage cell

    Maximum Operating Temperature: 600°F (316°C)
    Maximum Pressure: 20,000 psi (138 MPa)

    Utilities
    Mains:
    208-240 VAC, 10A, 50/60 Hz, 1 Phase
    Instrument Power: 
    90-240 VAC, 1A, 50/60 Hz, 1 Phase 
    Water: 20-80 psi / 140-550 kPa
    Coolant: Water or Ethylene glycol solution
    Air: Clean, dry compressed air; 50-100 psi / 340-690 kPa
    Drain: Suitable for hot water

    Environmental
    Indoor use, altitude up to 6562 ft (2000 m)
    Ambient Temperature: 60-122 °F (16 - 50 °C)
    Storage Temperature: 40 - 122 °F (5 - 50 °C)

    Environment
    Maximum Relatively Humidity:
    80% RH for temperatures up to 88°F (31°C)
    decreasing linearly to 50% RH at 104°F (40°C)

    Physical Dimensions (h x w x d):     21 in x 18 in x 19 in (53 cm x 46 cm x 48 cm)
    Weight: 130 lb (59 kg)
    Shipping Information (h x w x d): 32 in x 26 in x 35 in (81 cm x 66 cm x 89 cm)
    Weight: 210 lb (95.5 kg)

    Compliance
    CE

  • Brochures +

  • Manuals +