Skip to content
USA - English
Search

Phase Behavior

PVT Systems are used to perform PVT studies on a variety of fluids with a special emphasis on those fluids typically encountered in petroleum reservoirs. Our PVT systems are mercury-free and easy to use.
  • Model 3000 PVT Phase Behavior System
    Model 3000 PVT Phase Behavior System

    The Model 3000 PVT Phase Behavior System is the most widely accepted analytical (PVT) system in both domestic and international scientific laboratories. With a maximum operating temperature of 400°F / 204°C, this system offers detection in both Oil and Gas Condensate Studies.

    Keep Reading
  • Model 3000-CP Positive Displacement Pump System
    Model 3000-CP Positive Displacement Pump System

    The Model 3000-CP-011 pump system is a high flow, large volume dual cylinder pump system, capable of operating in continuous flow or pressure modes at flow  rates to 100ml/minute or pressure to 20,000 psi. Cylinders can also be operated independently in either flow or pressure modes.

    Keep Reading
  • Model 7322 Single Cell HPHT Consistometer
    Model 2328-900 Minimum Miscibility Apparatus

    The MMPA is an automated slim tube apparatus suitable for a wide range of miscible displacement experiments. The MMPA offers robust, custom LabView-based software that is easy to use and includes user friendly Windows™ based control software.

    Keep Reading
  • Model 2353 Equilibrium Flash Separator
    Model 2353 Equilibrium Flash Separator

    The Model 2353 Equilibrium Flash Separator consists of a 1st-stage separator chamber, equipped with a micrometer needle valve inlet, and a drain valve leading to a 2nd-stage receiver tube. The 1st-stage chamber, with a volume of 30 ml, is connected through stainless steel tubing and fittings to a pressure gauge and a back-pressure regulator to control the separator pressure.

    Keep Reading
  • Model 2347 Floating Piston Cylinder
    Model 2347 Floating Piston Cylinder

    The Model 2347 Floating Piston Cylinder is an essential laboratory component for all manner of liquid and gas analysis. The cylinder is high-pressure (15,000 psi) with low dead volume and a positive mixing capability. The cylinder comes complete as shown.

    Keep Reading
  • Model 2331D Digital Gasometer
    Model 2331D Digital Gasometer

    The design of the Model 2331D consists of two chambers which can be used separately or in series to provide a wide range of volume-resolution combinations. Each chamber contains an atmospheric volumetric pump with the piston connected to a measuring device, including a scale, a vernier, a pressure-adjusting knob and digital temperature and pressure displays.

    Keep Reading
  • Model 1602 Rolling Ball Viscometer
    Model 1602 Rolling Ball Viscometer

    The Model 1602 Rolling Ball Viscometer is specifically designed to determine the relative viscosity of reservoir liquids under downhole conditions. The principle of operation is to measure the time it takes for a metal ball to fall through the sample fluid. This simple yet effective approach is the most reliable for the high pressure measurements required to simulate reservoir conditions.

    Keep Reading
  • Viscosity/Rheology
    Viscosity/Rheology

    Well known for producing the world's most capable and reliable high pressure, high temperature (HPHT) well cementing instruments, the Chandler Engineering portfolio of instruments and systems has grown to include reservoir testing systems, drilling fluid testing and corrosion testing instruments as well as many other unique solutions for reservoir evaluation, well construction and completions. Click on one of the below options for additional information:

    Keep Reading