Skip to content
USA - English
Search
   

6700-M Mini-Loop™

Model 6700-M Mini-Loop™
The 6700-M Mini-Loop™ system is a benchtop instrument designed to measure the friction pressure of fluids. It determines the relative effects of friction reducer chemistries and treatments. The instrument allows rapid test turn-around for the repeat testing of stimulation fluids.

The unit circulates fluid through a single test section and uses custom Chandler Engineering software to record and analyze test data. This enables reliable testing in a simple to operate, compact system. The unit is ideal for quality control testing of slick water frac fluids.

The Mini Flow Loop system incorporates a low shear, progressive cavity pump for circulation of base fluids. A differential pressure transmitter measures the friction pressure across the test section. The friction reducing agent is added directly into the five gallon reservoir mixing tank.

The software is designed to be easy to use and powerful enough to calculate and collect all required data during the test cycle. All data and test parameters are stored in a test-specific .CSV file for analysis.

* Optional add-on module to enable real time display of flow rate and fluid density. 

  • Specifications +


    Features
    • Quick to Set up, Simple to Operate, and Easy to Clean and Maintain, Saving Time and Cost   
    • Benchtop Unit Fits Easily into Lab Environment
    • Over Pressure Relief Valve to Enhance Safety
    • Progressive Cavity Pump to Preserve Fluid Integrity
    • Real Time Display of Temperature, Differential Pressure and Friction Reduction Percentage for Instant Monitoring and Precise Performance Adjustments
    • Keyboard Tray for Ergonomics and Operator Convenience

    Standard Model:     6700-M Mini-Loop™
    Maximum Pressure: 50 PSI (0.34 MPa)
    Flow Rate: 4 Gallons / Minute
    Flow Rate Accuracy: ± 0.2% of Reading
    Differential Pressure Range (1): 0 - 30 PSI (0.21 MPa)
    Differential Pressure Accuracy: ± 0.25% of Full Scale
    Operating Conditions: 40-88°F (4-31°C)
    Maximum Sample Temperature: 113°F (45°C) no heating control is included

    Air Supply: 30-100psi
    Nitrogen Supply: 30-100psi

    Primary Wetted Materials: 316SS
    Single Measurement Test Section: 3/8” OD, 5 Gallon Mixing Tank

    Utilities:
    Power Requirements:     208 - 240 VAC
    Frequency: 50 or 60 Hz,1 Phase
    Input Current: 3A
    Water: 40-80 psi (for system cleanup)
    Dimensions (w x d x h): 55 in x 18 in x 46.2 in
    (140 cm x 46 cm x 117 cm) removable keyboard tray increases
    depth to 30
    Weight: 200 lbs (90.7 kg)

    Manufacturer’s specifications subject to change without notice

     


  • Brochures +